德標DIN最新全套5本（英文版）目錄！

Fasteners 1
DIN Handbook 10 (English edition)
Dimensional standards
For bolts, screws and studs
螺栓、螺絲和螺柱的尺寸標準
5th edition in English
Complete to April 2001
546 頁

Titles of standards

(arranged according to subject)

Standard number Date of issue Title Page
Hexagon head bolts and screws
DIN 561 02.95 Hexagon set screws with small hexagon and full dog point 16
DIN 564 02.95 Hexagon set screws with small hexagon, half dog point and flat cone point 21
DIN 609 02.95 Hexagon fit bolts 47
DIN931-2 09.87 M42 to M160X6 hexagon head bolts - Product grade B 61
DIN EN 1662 02.98 Hexagon bolts with flange - Small series (ISO/DIS 15071:1996,modified) 205
DIN EN 1665 11.98 Hexagon bolts with flange - Heavy series 215
DIN EN 24015 12.91 Hexagon head bolts with reduced shank (shank diameter≈pitch diameter)-Product grade B (ISO 4015:1979) 224
DIN EN ISO 4014 (DIN 931) 03.01 Hexagon head bolts - Product grades A and B (ISO 4014:1999) 274
DIN EN ISO 4016 03.01 Hexagon head bolts - Product grade C (ISO 4016:1999) 290
DIN EN ISO 4017 (DIN 933) 03.01 Hexagon head screws - Product grades A and B (ISO 4017:1999) 303
DIN EN ISO 4018 03.01 Hexagon head screws - Product grade C (ISO 4018:1999) 319
DIN EN ISO 8676 03.01 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999) 411
DIN EN ISO 8765 03.01 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999) 427
Hexagon head bolts and screws for use in structural steelwork
DIN 6914 10.89 High-strength hexagon head bolts with large widths across flats for structural steel bolting 126
DIN 7968 12.99 Steel hexagon fit bolts for structural steel bolting for supply with hexagon nuts 152
DIN 7969 12.99 Steel slotted countersunk head screws for structural steel bolting for supply with hexagon nuts 158
DIN 7990 12.99 Steel hexagon head bolts for structural steel bolting for supply with hexagon nuts 169
DIN 7999 12.83 High-strength hexagon fit bolts with large widths across flats for structural steel bolting 175
Hexalobular head bolts
DIN 34800 04.00 Steel hexalobular head bolts with small flange 180
DIN 34801 12.99 Steel hexalobular head bolts with large flange 187
Hexalobular socket head cap screws
DIN 34802 03.01 Steel hexalobular socket head cap screws with large driving feature 194
Hexagon socket head screws
DIN 6912 05.85 Hexagon socket thin head cap screws with pilot recess for wrench key 119
DIN 7984 05.85 Hexagon socket thin head cap screws 163
DIN EN ISO 4762 02.98 Hexagon socket head cap screws (ISO 4762:1997) 332
DIN EN ISO 7380 02.98 Hexagon socket button head screws (ISO 7380:1997) 402
DIN EN ISO 10642 02.98 Hexagon socket countersunk head screws (ISO 10642:1997) 449
Weld screw
DIN 34817 04.01 Weld screws with metric head 200
Square head bolts
DIN 478 02.85 Square head bolts with collar 4
DIN 479 02.85 Square head bolts with short dog point 8
DIN 480 02.85 Square head bolts with collar and oval half dog point 12
Slotted head screws
DIN EN ISO 1207 10.94 Slotted cheese head screws - Product grade A (ISO 1207:1992) 233
DIN EN ISO 1580 10.94 Slotted pan head screws - Product grade A (ISO 1580:1994) 247
DIN EN ISO 2009 10.94 Slotted countersunk flat head screws (common head style) (ISO 2009:1994) 256

DIN EN ISO 2010 10.94 Countersunk slotted raised head screws (common head style) - Product grade A (ISO 2010:1994) 265
Cross recessed head screws
DIN 967 01.94 Product grade A cross recessed pan head screws with collar 88
DIN EN ISO 7045 10.94 Pan head screws with type H or type Z cross recess-Product grade A (ISO 7045:1994) 347
DIN EN ISO 7046-1 10.94 Countersunk flat head screws (common head style) with type H or type Z cross recess, product grade A - Part 1:Steel of property class 4.8(ISO 7046-1:1994) 356
DIN EN ISO 7046-2 10.94 Cross recessed countersunk flat head screws (common head style), product grade A - Part 2:Steel of property class 8.8,stainless steel and nonferrous metals (ISO 7046-2:1990) 365
DIN EN ISO 7047 10.94 Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994) 374
DIN EN ISO 7048 10.94 Crossed recessed cheese head screws (ISO 7048:1998) 383
Screw and washer assemblies
DIN 6900-2 12.90 Screw and washer assemblies - Coarse threaded screws with captive wave spring washer 105
DIN 6900-3 12.90 Screw and washer assemblies - Coarse threaded screws with captive curved spring lock washer 109
DIN 6900-4 12.90 Screw and washer assemblies - Coarse threaded screws with captive serrated lock washer 113
DIN 6900-5 12.90 Screw and washer assemblies - Coarse threaded screws with captive conical spring washer 116
DIN EN ISO 10644 10.98 Screw and washer assemblies with plain washers - Washer hardness classes 200HV and 300HV (ISO 10644:1998) 463
Double end studs
DIN 976-1 02.95 Metric thread stud bolts 95
DIN 976-2 02.95 Metric interference-fit thread stud bolts 101
Studs
DIN 835 02.95 Studs with a length of engagement equal to about 2d 57
DIN 938 02.95 Studs with a length of engagement equal to about 1d 66
DIN 939 02.95 Studs with a length of engagement equal to about 1,25d 71
DIN 940 02.95 Studs with a length of engagement equal to about 2,5d 76
DIN 949-1 02.95 Metric interference-fit thread studs with a length of engagement equal to about 2d(type A) 80
DIN 949-2 07.95 Metric interference-fit thread studs with a length of engagement equal to about 2,5d(type B) 84
Tapping screws
DIN 968 01.94 Cross recessed pan head tapping screws with collar 92
DIN 6928 11.90 Hexagon washers head tapping screws 132
DIN EN ISO 1478 12.99 Tapping screw threads (ISO 1478:1999) 242
DIN EN ISO 10510 12.99 Tapping screw and washer assemblies with plain washers (ISO 10510:1999) 442
ISO 1479 08.90 Hexagon head tapping screws 508
ISO 1481 (DIN 7971) 08.90 Slotted pan head tapping screws 513
ISO 1482 08.82 Slotted countersunk (flat) head tapping screws (common head style) 518
ISO 1483 08.90 Slotted raised countersunk (oval) head tapping screws (common head style) 523
ISO 7049 (DIN 7981) 08.90 Crossed recessed pan head tapping screws 528
ISO 7050 (DIN 7982) 08.90 Crossed recessed countersunk (flat) head tapping screws (common head style) 534
ISO 7051 08.90 Cross recessed raised countersunk (oval) head tapping screws 540
Thread forming screws
DIN 267-30 02.01 Technical delivery conditions for fasteners - Metric thread rolling screws of property class 10.9 1
DIN 7500-1 01.00 ISO metric thread rolling screws - Types, designation and requirements 134
DIN 7500-2 12.84 Thread rolling screws for ISO metric thread - Guide-line values for hole diameters 140
DIN 7513 09.95 Hexagon head and slotted head thread cutting screws - Dimensions, requirements and testing 142
DIN 7516 09.95 Crossed recessed head thread cutting screws - Dimensions, requirements and testing 147
DIN EN ISO 7085 01.00 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999) 391
DIN EN ISO 10666 (DIN 7504)02.00 Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999) 474
DIN EN ISO 15480 02.00 Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999) 483
DIN EN ISO 15481 02.00 Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999) 490
DIN EN ISO 15482 02.00 Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) 496
DIN EN ISO 15483 02.00 Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999) 502
Miscellaneous bolts and screws
DIN 603*) 10.81 Mushroom head square neck bolts 26
DIN 604*) 10.81 Flat countersunk nib bolts 31
DIN 605*) 10.81 Flat countersunk square neck bolts with long square 35
DIN 607*) 10.81 Cup head nib bolts 39
DIN 608*) 10.81 Flat countersunk square neck bolts with short square 43



Fasteners 2
DIN Handbook 43 (English edition)
Standards for pins, rivets, keys, adjusting
and retaining rings
銷、鉚釘、鍵和擋圈的標準
3rd edition in English
Complete to September 2004
585 頁

Titles of standards

(arranged according to subject)

Standard number Date of issue Title Page
Basic standards
DIN 918 09.79 Fasteners - Terminology, spelling of terms, abbreviations 79
Suppl.3 to DIN 918 01.99 Overview of European Standards of fasteners 83
DIN EN ISO 3269 11.00 Fasteners-Acceptance inspection(ISO3269:2000)284
ISO 2768-1 11.89 General tolerances-Tolerances for linear and angu-lar dimensions without individual tolerance indications551
ISO 2768-2 11.89 General tolerances-Geometrical tolerances for fea-tures without individual tolerance indications556
Clevis pins
DIN 1445 02.77 Clevis pins with head and stud end 124
DIN EN 22340 10.92 Clevis pins without head (ISO 2340:1986) 226
DIN EN 22341 10.92 Clevis pins with head (ISO 2341:1986) 235
DIN EN 28738 10.92 Plain washers for use with clevis pins, product grade A (ISO 8738:1986) 260
Pins
DIN 258 02.77 Taper pins with thread ends and constant taper lengths 16
DIN 1469 11.78 Grooved pins, half-length grooved, with gorge 128
DIN 7341 07.77 Rivet pins 180
DIN EN 22339 10.92 Unhardened taper pins (ISO 2339:1986) 218
DIN EN 28736 10.92 Unhardened taper pins with internal thread (ISO 8736:1986) 244
DIN EN 28737 10.92 Unhardened taper pins with external thread (ISO 8737:1986) 252
DIN EN ISO 2338 02.98 Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) 278
DIN EN ISO 8733 03.98 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel (ISO 8733:1997) 305
DIN EN ISO 8734 03.98 Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)(ISO 8734:1997) 312
DIN EN ISO 8735 03.98 Parallel pins with internal thread, of hardened steel and martensitic stainless steel (ISO 8735:1997) 319
DIN EN ISO 8739 03.98 Grooved pins, full-length parallel grooved, with pilot (ISO 8739:1997) 326
DIN EN ISO 8740 03.98 Grooved pins, full-length parallel grooved, with chamfer (ISO 8740:1997) 333
DIN EN ISO 8741 03.98 Grooved pins, half-length reverse-taper grooved (ISO 8741:1997) 340
DIN EN ISO 8742 03.98 Grooved pins, one-third-length centre grooved (ISO 8742:1997) 347
DIN EN ISO 8743 03.98 Grooved pins, half-length centre grooved (ISO 8743:1997) 354
DIN EN ISO 8744 03.98 Grooved pins, full-length taper grooved (ISO 8744:1997) 361
DIN EN ISO 8745 03.98 Grooved pins, half-length taper grooved (ISO 8745:1997) 368
DIN EN ISO 8746 03.98 Grooved pins with round head (ISO 8746:1997) 375
DIN EN ISO 8747 03.98 Grooved pins with countersunk head (ISO 8747:1997) 382
Straight pins
DIN 7349 07.74 Plain washers for bolts with heavy clamping sleeves 184
DIN EN ISO 8748 03.98 Spring-type straight pins, coiled, heavy duty (ISO 8748:1997) 388
DIN EN ISO 8750 03.98 Spring-type straight pins, coiled ,standard duty (ISO 8750:1997) 395
DIN EN ISO 8751 03.98 Spring-type straight pins, coiled ,light duty (ISO 8751:1997) 402
DIN EN ISO 8752 03.98 Spring-type straight pins, slotted ,heavy duty (ISO 8752:1997) 410
DIN EN ISO 13337 02.98 Spring-type straight pins, slotted ,light duty (ISO 13337:1997) 418
Testing of pins
DIN EN 28749 10.92 Determination of shear strength of pins (ISO 8749:1986) 267
Nails
DIN 1143-1 08.82 Round plain head nails for use in automatic nailing machines 119
DIN 1157 04.73 Decorator's tacks 121
DIN 1158 04.73 Wall hooks 122
DIN 1163 04.73 Moulding nails 123
DIN 18182-4 01.87 Accessories for the installation of gypsum plaster-board-Nails 189
DIN 68163 01.82 Nails for assembling timber pallets 191
DIN EN 10230-1 01.00 Steel wire nail-part1:Loose nail for general appli-cations193
Split pins
DIN 11024 01.73 Spring cotters 188
DIN EN ISO 1234 02.98 Split pins (ISO 1234:1997) 271
Rivets
DIN 101 05.93 Rivets-Technical delivery conditions 1
DIN 124 05.93 Steel round head rivets with nominal diameters from 10mm to 36 mm 9
DIN 302 05.93 Steel countersunk head rivets with nominal diameters from 10mm to 36 mm 24
DIN 660 05.93 Round head rivets with nominal diameters from 1mm to 8 mm 55
DIN 661 05.93 Countersunk head rivets with nominal diameters from 1mm to 8 mm 60
DIN 662 05.93 Oval-head rivets with nominal diameters from 1,6mm to 6 mm 65
DIN 674 05.93 Mushroom head rivets with nominal diameters from 1,6mm to 6 mm 70
DIN 675 10.93 Flat countersunk head rivets with nominal diameters from 3mm to 5 mm 75
DIN 6434 11.84 Rivet sets 132
DIN 6791 05.93 Semitubular pan head rivets with nominal diameters from1,6mm to 10 mm 134
DIN 6792 05.93 Semitubular countersunk head rivets with nominal diameters from1,6mm to 10 mm 138
DIN 7331 05.93 Compression rivets 164
DIN 7338 08.93 Brake and clutch lining rivets 168
DIN 7339 05.93 One-piece tubular rivets drawn from strip 172
DIN 7340 05.93 Tubular rivets made from tube 175
DIN EN ISO 14589 08.01 Blind rivets-Mechanical testing (ISO14589:2000)426
DIN EN ISO 15975 04.03 Closed end blind rivets with break pull mandrel and protruding head-Al/AlA (ISO15975:2002)442
DIN EN ISO 15976 04.03 Closed end blind rivets with break pull mandrel and protruding head-St/St (ISO15976:2002)449
DIN EN ISO 15977 04.03 Open end blind rivets with break pull mandrel and protruding head-AlA/St (ISO15977:2002)456
DIN EN ISO 15978 04.03 Open end blind rivets with break pull mandrel and countersunk head-AlA/St (ISO15978:2002)464
DIN EN ISO 15979(DIN 7337) 04.03 Open end blind rivets with break pull mandrel and protruding head-St/St (ISO15979:2002)472
DIN EN ISO 15980 04.03 Open end blind rivets with break pull mandrel and countersunk head-St/St (ISO15980:2002)480
DIN EN ISO 15981 04.03 Open end blind rivets with break pull mandrel and protruding head-AlA/AlA (ISO15981:2002)488
DIN EN ISO 15982 04.03 Open end blind rivets with break pull mandrel and countersunk head-AlA/AlA (ISO15982:2002)496
DIN EN ISO 15983 04.03 Open end blind rivets with break pull mandrel and protruding head-A2/A2 (ISO15983:2002)504
DIN EN ISO 15984 04.03 Open end blind rivets with break pull mandrel and countersunk head-A2/A2 (ISO15984:2002)512
DIN EN ISO 16582 04.03 Open end blind rivets with break pull mandrel and protruding head-Cu/St or Cu/Br or Cu/SSt (ISO16582:2002)520
DIN EN ISO 16583 04.03 Open end blind rivets with break pull mandrel and countersunk head-Cu/St or Cu/Br or Cu/SSt (ISO16583:2002)528
DIN EN ISO 16584 04.03 Open end blind rivets with break pull mandrel and protruding head-NiCu/St or NiCu/SSt (ISO16584:2002)536
DIN EN ISO 16585 04.03 Closed end blind rivets with pull mandrel and protruding head-A2/SSt (ISO16585:2002)544
ISO 14588 12.02 Blind rivets-Terminology and definitions566
Keys
DIN 268 09.74 Tangential keys and tangential keyways for alternating shock loads 18
DIN 271 09.74 Tangential keys and tangential keyways for constant loads 21
DIN 6880 04.75 Bright key steel - Dimensions, permissible variations, weights 149
DIN 6881 02.56 Taper key torque transmission - Saddle keys - Dimensions and application 152
DIN 6883 02.56 Taper key torque transmission - Parallel keys - Dimensions and application 153
DIN 6884 02.56 Taper key torque transmission - Gib-head parallel keys - Dimensions and application 154
DIN 6885-1 08.68 Drive-type fastenings without taper action - Parallel keys, keyways, deep pattern 156a
DIN 6885-2 12.67 Drive-type fastenings without taper action - Parallel keys, keyways, deep pattern for machine tools - Dimensions and application 156c
DIN 6885-3 02.56 Drive-type fastenings without taper action - Parallel keys, shallow action - Dimensions and application 156e
DIN 6886 12.67 Stressed-type fastenings with taper action - Taper keys, keyways - Dimensions and application 157
DIN 6887 04.68 Stressed-type fastenings with taper action -Taper keys with gib heads, keyways - Dimensions and application 159
DIN 6888 08.56 Drive-type fastenings without taper action - Woodruff keys - Dimensions and application 161
DIN 6889 02.56 Taper key torque transmission - Gib-head saddle keys - Dimensions and application 163
Retaining rings
DIN 471 09.81 Circlips (retaining rings) for shafts - Normal type and heavy type 31
DIN 472 09.81 Circlips (retaining rings) for bores - Normal type and heavy type 43
DIN 983 09.81 Retaining rings with lugs for use on shafts (external circlips) 93
DIN 984 09.81 Spring retaining rings with lugs for use in bores (internal circlips) 103
DIN 6799 09.81 Lock washers (retaining washers) for shafts 142
DIN 7993 04.70 Round wire snap rings and snap ring grooves for shafts and bores 185
Shim rings
DIN 988 03.90 Shim rings and supporting rings 113

Fasteners 3
DIN Handbook 55 (English edition)
Standards for technical delivery conditions
For bolts, screws, nuts and washers
螺栓、螺絲、螺母和墊圈的技術交貨標準
3rd edition in English
Complete to June 2005
524 頁

Titles of standards

(arranged according to subject)

Standard number Date of issue Title Page
DIN 267-2 11.84 Fasteners - Technical delivery conditions 1
DIN 267-6 09.75 Fasteners - Product grade F 5
DIN 267-13 08.93 Fasteners-Technical delivery conditions for bolt/nut assemblies with specific mechanical properties, for service temperatures from -200。C to +700。C 10
DIN 267-24 08.83 Fasteners - Technical delivery conditions - Property classes for nuts 15
DIN 267-26 10.87 Fasteners - Technical delivery conditions - Steel spring washers for bolt/nut assemblies 19
DIN 267-27 01.04 Fasteners - Technical derlivery conditions for fasteners - Adhesive-coated steel screws, bolts and studs 29
DIN 267-28 01.04 Technical delivery conditions for fasteners - Self-locking steel screws bolts, and studs 37
DIN 267-29 08.93 Fasteners - Product grades for bolts/nut assemblies for service temperatures from -200。C to +700。C 43
DIN 267-30 02.01 Technical delivery conditions for fateners-Metric thread rolling screws of property class 10.9 51
DIN 918 Suppl.3 01.05 Overview of European Standards of fasteners 54
DIN 946 10.91 Determination of coefficient of friction of bolt/nut assemblies under specified conditions 66
DIN 969 12.97 Axial load fatigue testing of threaded fasteners 70
DIN EN 20898-2 02.94 Mechanical properties of fasteners - Nuts with coarse pitch thread and specified proof load values 81
DIN EN 20898-7 04.95 Mechanical properties of fasteners - Torsional test and minimum torques of bolts and screws with nominal diameters 1 mm to 10 mm 102
DIN EN 26157-1 12.91 Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements 109
DIN EN 26157-3 12.91 Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements 122
DIN EN 28839 12.91 Mechanical properties of fasteners - Nonferrous metal bolts, screws, studs and nuts 139
DIN EN ISO 898-1 11.99 Mechanical properties of fasteners made of carbon steel and alloy steel-Bolts, screws and studs 147
DIN EN ISO 898-5 10.98 Mechanical properties of fasteners made of carbon steel and alloy steel-Set screws and similar threaded fasteners not under tensile stresses 179
DIN EN ISO 898-6 02.96 Mechanical properties of fasteners - Nuts with fine pitch thread and specified proof load values 189
DIN EN ISO 2320 03.98 Prevailing torque type steel hexagon nuts - Mechanical and performance properties 201
DIN EN ISO 2702 10.94 Heat-treated steel tapping screws - Mechanical properties 224
DIN EN ISO 3269 11.00 Fasteners-Acceptance inspection 231
DIN EN ISO 3506-1 03.98 Mechanical properties of corrosion-resistant stainless steel fasteners - Bolts, screws and studs 252
DIN EN ISO 3506-2 03.98 Mechanical properties of corrosion-resistant stainless steel fasteners - Nuts 275
DIN EN ISO 3506-3 03.98 Mechanical properties of corrosion-resistant stainless steel fasteners - Set screws and similar fasteners not under tensile stress 292
DIN EN ISO 3506-4 10.03 Mechanical properties of corrosion-resistant stainless steel fasteners - Tapping screws 307
DIN EN ISO 4042 01.01 Fasteners - Electroplated coatings 326
DIN EN ISO 4759-1 04.01 Tolerances for fasteners-Bolts, screws, studs and nuts-Product grade A, B and C 350
DIN EN ISO 4759-3 09.00 Tolerances for fasteners-Pain washers for bolts,screws and nuts-Product grades A and C 413
DIN EN ISO 6157-2 01.00 Fasteners-Surface discontinuities-Nuts 422
DIN EN ISO 7085 01.00 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws 436
DIN EN ISO 10484 10.04 Widening test on nuts 447
DIN EN ISO 10485 10.04 Cone proof load test on nuts 455
DIN EN ISO 10666 02.00 Drilling screws with tapping screw thread - Mechanical and functional properties 460
DIN EN ISO 10683 02.01 Fasteners-Non-electrolytically applied zinc flake coatings 469
DIN EN ISO 15330 01.00 Fasteners-Preloading test for the detection of hydro-gen embrittlement-Parallel bearing surface menthod 482
DIN EN ISO 16048 06.03 Passivation of corrosion-resistant stainless steel fas-teners 494
DIN EN ISO 16426 06.03 Fasteners-Quality assurance system 502
ISo 8992 08.04 Fasteners-General requirements for bolts,screws,studs and nuts 516



 


Fasteners 5
DIN Handbook 193 (English edition)
Basic standards
基本標準
2nd edition in English
Complete in January 2005
302 頁

Titles of standards

(arranged according to subject)

Standard number Date of issue Title Page
DIN 66 04.90 Countersinks for countersunk head screws with ISO 7721 common head style 1
DIN 74 04.03 Countersinks for countersunk head screws(except screws with DIN EN 27721 head) 4
DIN 76-1 06.04 Thread run-outs and thread undercuts for ISO metric screw threads as in DIN 13-1 8
DIN 76-2 12.84 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228-1 13
DIN 78 03.01 Bolt end protrusions 16
DIN 202 11.99 Screw threads - General plan 18
DIN 475-1 01.84 Widths across flats for bolts,screws, valves and fittings 26
DIN 918 09.79 Fasteners-Terminology,spelling of terms abbrevia-tions 30
DIN 918 Suppl.3 01.05 Overview of European Standards for fasteners 34
DIN 962 11.01 Designation system for fasteners 46
DIN 974-1 05.91 Diameters of counterbores (holes) for cheese head, pan head and hexagon socket head cap screws 55
DIN 974-2 05.91 Diameters of counterbores (holes) for hexagon bolts and nuts 59
DIN 2510-2 08.71 Bolted connections with reduced shank - Metric screw thread with large clearance - Nominal dimensions and limits 63
DIN 2510-8 08.71 Bolted connections with reduced shank - Threaded holes for studs 64
DIN 7500-2 12.84 Thread rolling screws for ISO metric thread - Guideline values for hole diameters 65
DIN 7975 08.89 Tapping screw connections - Guideline values for core hole diameters and use 67
DIN 7998 02.75 Threads and thread ends for wood screw 74
DIN 8140-1 07.99 Wire thread inserts for ISO metric screw threads - Dimensions and technical delivery conditions 75
DIN 34803 11.01 Split pin holes and wire holes in bolts screws and studs 88
DIN EN 20225 02.92 Bolts, screws, studs and nuts - Symbols and desig-nations for dimensioning 92
DIN EN 20273 02.92 Fasteners - Clearance holes for bolts and screws 112
DIN EN 27721 02.92 Countersunk head screws - Head configuration and gauging 117
DIN EN ISO 1478 12.99 Tapping screw threads 123
DIN EN ISO 4753 07.00 Fasteners - Ends of parts with external ISO metric screw thread 128
DIN EN ISO 4757 10.94 Cross recesses for screws 135
DIN EN ISO 10664 01.00 Hexalobular internal driving feature for bolts and screws 146
DIN EN ISO 23429 05.04 Gauging of hexagon sockets 156
DIN ISO 261 11.99 ISO general purpose metric screw threads - General plan 161
DIN ISO 262 11.99 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts 167
DIN ISO 885 08.01 General purpose bolts and screws,metric series-Radil under the head 170
DIN ISO 965-1 11.99 ISO general purpose metric screw threads - Toler-ances - Part 1: Principles and basic data 173
DIN ISO 965-2 11.99 ISO general purpose metric screw threads - Toler-ances - Part 2: Limits of sizes for general purpose bolt and nut threads - Medium quality 194
DIN ISO 965-3 11.99 ISO general purpose metric screw threads - Toler-ances - Part 3: Deviations for constructional screw threads 201
DIN ISO 965-4 05.02 ISO general purpose metric screw threads - Toler-ances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing 219
DIN ISO 965-5 05.02 ISO general purpose metric screw threads - Toler-ances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of toleranceposition h before galvanizing 225
ISO 272 01.82 Fasteners-Hexagon products-Widths across flats 232
ISO 1891 12.79 Bolt,screws,nuts and accessories-Terminology and nomenclature 237

壁紙下載：　　800x600　　1024x768